Stock

A set of tools for cutting a ‘window’ in a casing string with a hydraulic anchor. It is used for sidetracking by installing whipstock in vertical and directional wellbores with support on the casing string.

A set of tools for cutting a ‘window’ in a casing string with a hydraulic anchor with support on the face. This design requires installation of a cement support bridge in the wellbore at a given interval.

End milling cutters are designed for the destruction of cement stone, sand plugs and cemented metal objects along the entire cross-section of wells during repair and restoration work in oil and gas wells, as well as drilling the technological equipment of packers and plugs, including multistage hydraulic fracturing (MSHF) ports.

Cone casing milling cutter is designed for milling the walls of casing pipes, leveling geometric parameters; for crumples removal and scuffing; removing cement and paraffin deposits; working out perforation intervals.

Cone spiral casing milling cutter is designed for milling the walls of casing pipes, leveling geometric parameters; for crumples removal and scuffing; removing cement and paraffin deposits; working out perforation intervals.

Ring milling cutter is designed for the destruction of metal objects, cement stone and cemented metal objects in the annular space between the well wall or casing and the elements of the elevator or drill strings during repair and restoration work in oil, gas and exploration wells.

Expanding milling cutter is included in the composition of the bottom hole assembly (BHA) for well templating and cutting a window in the casing.

Reinforced end milling cutter with carbide plates (Barracuda type) is designed for the destruction of metal objects, cement stone along the entire section of the well during repair and restoration work. The cutting surface of the milling cutter has a segmented design, with each segment reinforced with carbide teeth.

Concave end milling cutter is designed for destruction of metal objects, cement stone and cemented metal objects along the entire cross-section of wells with the centering of loose milling objects relative to the milling cutter during repair and restoration work in oil, gas and geological exploration wells.

Cone spiral casing milling cutter is designed for milling the walls of casing pipes, leveling geometric parameters; for crumples removal and scuffing; removing cement and paraffin deposits; working out perforation intervals.

End milling cutters are designed for the destruction of cement stone, sand plugs and cemented metal objects along the entire cross-section of wells during repair and restoration work in oil and gas wells, as well as drilling the technological equipment of packers and plugs, including multistage hydraulic fracturing (MSHF) ports.

Smooth tap is a fishing tool designed for gripping by the inner surface and subsequent extraction of tubular elements of the strings during fishing operations in wells.

Smooth bells are a branch pipe with a connecting coupling thread in the upper part, and an internal fishing cone of a given diameter in the lower part.

Threaded bells are a branch pipe with a connecting thread is made in the upper part.

Releasing pipe catcher is designed for gripping by the inner surface and subsequent extraction of tubular elements of the strings during fishing operations in wells.

Threaded taps are designed for extracting string elements.

Spiral cable catcher is a branch pipe with a connecting thread in the upper part, and cutting edges in the lower part.

Mechanical scraper (SM) is designed to remove corrosion, clay crust, cement shell, paraffin deposits and traces of perforation from the inner walls of casing pipes.

The valve is designed for crimping drill and oil-well tubing pipes in a given pressure range. Supplied in a case with SPTA.

The sub is designed to connect the parts of the drill string used in well drilling, as well as during the assembly of the bottom of the drill string.

The sub is designed for flushing wells. The dimensions and connecting threads are made as per the Customer's specifications.

The calibrator with spiral blades is designed for centering the drilling tool in the well and calibrating the walls of the well during drilling, as well as during repair work in oil, gas and exploration wells.

Calibrator-expander is designed for processing and calibrating the walls of the well, in order to prevent possible complications during the descent of the casing string.

The clamps are designed for fastening, holding the equipment and moving it to the wellhead.